If you're not sure which switch to use, TP-Link switches may be a good choice. Please note that the main Deco unit will act as an NAT router by default. Deco X20(3-pack) , Deco X60(1-pack) , Deco X60(2-pack) , Deco X20 , Deco X60 , Deco X60(3-pack) , Deco X20(1-pack) , Deco M4(3-pack) , Deco M9 Plus , Deco M5 , Deco M4 , Deco P7 , Deco P7(2-pack) , Deco M9 Plus(2-pack) , Deco S4(2-pack) , Deco S4(1-pack) , Deco S4 , Deco X20(2-pack) , Deco S4(3-pack). Please turn it on for the best experience. But if that is the case you loose advantage of having a mesh. Built-in Antivirus helps you defend against malicious website and guard your online payment. Fast Connections: Three separate wireless bands up to 2134 Mbps with a dynamic backhaul up to 1.5 Gbps ensure stable, high-speed connections wherever you are in your home. No need to switch on this feature manually. Three separate Wi-Fi bands deliver super-fast, stable connections to devices in every room of your home. Q7：How to turn off Ethernet backhaul on the Deco? Here are two typical connection structures for Ethernet Backhaul: Notes: 1. For example, if you have three Deco units and want to create Wi-Fi not only in your living room and bedroom but also in the office, which is a little far away from other rooms and has no Wi-Fi coverage. If there is an Ethernet icon, it means the slave Deco is using Ethernet backhaul. Yes, just configure and add different Deco models in the same Deco network. Deco M9 Plus uses not only 5G_1 (867Mbps) as wireless backhaul but also 5G_2 (867Mbps) and 2.4G (400Mbps) as backhaul while traffic gets heavy, delivering … If you have a D-Link switch and encounter an unstable issue with Ethernet backhaul, we recommend to change the switch to another brand or contact D-Link support directly for a fix. Please ensure there are no other DHCP servers behind the main Deco. If you have a D-Link switch and encounter an unstable issue with Ethernet backhaul, we recommend to change the switch to another brand or contact D-Link support directly for a fix. TP-Link's Deco M9 Plus is a follow up to its Deco M5 I tested just over a year ago as part of the Wi-Fi System Roundup. You could refer to the link to know how to add different Deco models in the same network. We have found that some switches (such as D-Link switches) cannot handle the Ethernet Backhaul packets between Decos properly. Expand Mesh Wi-Fi coverage anytime by simply adding more Decos. Broad Coverage: Enjoy Wi-Fi coverage up to 6,500 square feet with just 3 Deco M9 Plus units and expand it by just adding more Decos. Nope. Follow in-app instructions to configure your Deco system. Q4: Why my Deco units become unstable once they're connected via a switch? As you say both are in AP mode they should work as simple access points, so they should have separate SSID's. TP-Link HomeCareTM ensures every device on your network remains protected, with a threat database updated live by Trend MicroTM. Please ensure there are no other DHCP servers behind the main Deco. Q1: Can I connect all the Deco units directly to my home modem/router? If not, they may be in a network loop and cause unexpected dropout issues. You could refer to the link to know how to add different Deco models in the same network. It seems that some switches adopt the same management IP as the LAN IP address of Deco, which may cause some conflicts on the network. Normally, after wired Deco units with an Ethernet cable, the Ethernet backhaul will take effect automatically. Seamless Management: Deco M9 Plus acts as a hub for your wireless and smart home devices. You can set up one for wireless backhaul, and the other one for Ethernet backhaul as you want. Q9: Can I wire Deco via Ethernet cable on different floors? Yes, but you need to pay attention to the working mode of the Deco. It improves upon tri-band Wi-Fi systems with TP-Link ONE mesh, which combines dedicated and dynamic backhaul technology for stronger performance. If you're not sure which switch to use, TP-Link switches may be a good choice. In this case, it's recommended to change the management IP address of switches to another one. It's probably that you're using a D-Link switch. Hi, is it possible to have two of my deco devices connected with ethernet cables and the third connecting over Wifi? 2. All rights reserved. Also, trying to extend the wifi signal with a low cost solution I bought an E3 set, comprising of an E4R and a wifi only slave. Then you can put the main Deco and slave Deco 1 in your living room and bedroom (wireless backhaul). Q3: How do I know if Ethernet Backhaul takes effect? Q&A of functional explanation or specification parameters. Set interactions between Zigbee, Bluetooth and Wi-Fi devices. For example, if you have three Deco units and want to create Wi-Fi not only in your living room and bedroom but also in the office, which is a little far away from other rooms and has no Wi-Fi coverage. Deco M3/ E3 is comprised of a router (Deco M4R/ E4R) and one or two satellites (Deco M3W), while Deco M4/ E4 is comprised of two or three Deco M4R/ E4R units. Dear TP,Is is strictly necessary for AP's to be in WiFi range of at least one other AP when they are connected by Ethernet as well? However, we find that some D-Link switches will not forward packets based on IEEE 1905.1 protocol, causing all Deco units in a network loop and becoming quite unstable. There is a long list of complaints about this with the promise that a firmware upgrade is in the works. Ethernet Backhaul is a feature that makes it possible to wire the Deco units together. I would like to be kept up to date with TP-Link news, product updates and promotions. Please turn it on for the best experience. In this case, the satellite 2 unit will work through Ethernet backhaul, while the main and satellite 1 will work through wireless backhaul. Please make sure there aren't any other DHCP servers behind the main Deco. Powerful parental controls can limit online time and block inappropriate content according to unique profiles created for each family member. No more searching around for a stable connection. @RuiCardoso M9+ mobile app has missing info present on other Deco's (signal strenght of source, name of the signal source) so there is no backhaul info for us. Actual wireless data throughput. Tap here to add the Deco M9 Plus to the existing Deco M5’s network. Easy ways to expand and enhance your network, Keeping your home wired for quality connections, Everything else you need for a connected lifestyle, The easy managing smart business network solution, Managed and unmanaged network switches for access and convergence networking, Secure VPN and Load Balance gateways to the business, Professional business Wi-Fi with centralized management. As for satellite Deco 2, you can place it in the office with a long Ethernet cable connected to the main or satellite 1 unit. Nope. Then Ethernet Backhaul will take effect automatically. wireless coverage, and quantity of connected devices are not guaranteed and will vary as a result of 1) environmental factors, including building materials, physical objects, and obstacles, 2) network conditions, including local interference, volume and density of traffic, product location, network complexity, and network overhead, and 3) client limitations, including rated performance, location, connection quality, and client condition. Once set up, the Deco M9 Plus can mostly be left to do its thing, but we'd encourage you to delve into the app and explore some of the handy settings. TP-Link HomeCareTM is available for free for the first few months after subscription. Your browser does not support JavaScript. If the Deco units are connected to a switch, please connect them directly bypassing the switch for a try. And Deco will transmit data between the two units through the Ethernet connection, which is more stable and faster than Wi-Fi. Total Security: HomeCareTM provides personalized features, including Parental Controls, Antivirus, and Quality of Service (QoS)* to ensure a safer online experience. Yes, just configure and add different Deco models in the same Deco network. Some random equipments just get reconnected a few times during a day. If you have switches on the network and find Ethernet Backhaul not working, please check the management IP address of your switches. Deco M9 Plus uses not only 5G_1(867Mbps) as wireless backhaul but also 5G_2(867Mbps) and 2.4G(400Mbps) as backhaul while traffic gets heavy, delivering speeds over 1000Mbps which is ideal for your gigabit fiber. Built-in Antivirus helps you defend against malicious website and guard your online payment. With an ever increasing number of bandwidth-hungry gadgets in our homes, you need a network that can rise to the challenge. As for slave Deco 2, you can place it in the office  with a long Ethernet cable connected to the main or slave 1 unit. Note: On the main Deco, one Ethernet port should connect to the modem/router to get internet, the other Ethernet port can be used for Ethernet backhaul, or connect to a computer. There are some complains about connections through switches, some can block the wire due to short term loopbacks at setup. Q4: To use the Ethernet Backhaul feature, do I need to wire all my Deco units? https://www.tp-link.com/en/support/faq/2248/, How to set up Ethernet Backhaul with your Deco devices. printer to deco 1, phone to deco 3..) 3) Possibility to change wifi channels. With network speeds three times faster than the previous generation routers thanks to 802.11ac wireless technology, Deco can provide lag-free connections for over 100 devices. Maintains internet access wherever you go. The Deco Ethernet backhaul feature is based on the standard IEEE 1905.1 protocol. Seamless Coverage: Achieve seamless whole-home coverage with a mesh Wi-Fi system and eliminate weak signal areas once and for all. By completing this form you confirm that you understand and agree to our Privacy Policy.